QUICK hand dispenser for industrial use as a complete starter KIT
The dosing device is suitable for the manual application of pasty liquids such as solder paste, flux cream, adhesives or greases. These can be applied pneumatically and in timed intervals, and also set using the interval mode. After each dispensing process, an automatically generated vacuum ensures the return flow of the dispensing medium. A compressed air connection with a quick-release coupling NW 7.2 is required as an external medium.
Scope of delivery:
1 dispensing paste control 200-240V AC
1 stand for 10cc and 30cc cartridges
1 compressed air spiral connection with quick-release connector NW 7.2 (extendable up to max. 3m)
1 foot switch (1.8m connection cable)
1 mains cable VDE 240V AC
1 dispensing needle starter kit 10 pieces
1 hose connection 1m with 35cc cartridge connection and empty cartridge
1 hose connection 1m with 10cc cartridge connection and empty cartridge
1 German operating manual
Technical data:
Possible uses: manual or automatic with 16 programs
Dosing time: 0.01 – 99.99 seconds
Interval time: 0.1 – 9.9 seconds
Repeatability Tolerance: +/- 0.5%
Dimensions: 238 x 150 x 60 mm
Weight: 1.7 kg
Power supply: 200-240 volts AC
Compressed air input: 35-100 PSI / 2.4-6.9 bar / 0.25-0.7 MPa
Compressed air outlet: 1 – 100 PSI / 0.07 – 6.9 bar / 0.01 – 0.7 MPa
The smallest possible dispensing volume is 0.01 ml. However, it varies depending on the viscosity, needle size, dispensing time and air pressure.
