The QUICK TSS10C-2C cartridge soldering tip is a high-performance soldering tip for the TS10 system, designed for controlled soldering tasks requiring low to moderate heat output. With its 45° bevel and 2.0 mm width, it offers an excellent combination of precise control, good accessibility, and reliable heat transfer. The 200W version is therefore particularly suitable for applications in electronics, service, repair, and rework where clean work is required and sufficient thermal reserve is necessary.
The beveled tip shape offers practical advantages over straight versions. The 45° angle allows the tip to be positioned comfortably and guided easily in many work situations. Depending on the grip, the edge can be used for precise work, or a slightly larger contact area can be used to apply heat to the solder joint. This creates a balanced working geometry that supports both controlled soldering and practical heat transfer.
In combination with the QUICK TS10 system, the TSS10C-2C is a highly versatile solution for professional users who want to work cleanly and safely on typical electronic connections. The 200W power ensures that sufficient power is available even for slightly larger pads, terminals, or heat-absorbing contact surfaces, without the tip becoming too coarse for finer work.
Application range due to the tip shape
The 45°-angled 2.0-mm tip is particularly well-suited for fine to medium-sized solder joints where a clear view of the joint and controlled guidance are important. Thanks to its angled shape, the tip can be placed flat against pads, traces, component terminals, and smaller plug contacts. This facilitates the application of solder and promotes even heating of the solder joint.
Typical applications include general electronics soldering, repair and rework on printed circuit boards, soldering small to medium-sized THT connections, fine cable connections, plug contacts, and general assemblies in service and workshop environments. This tip shape also demonstrates its strengths on densely populated boards or in situations where a favorable working angle is helpful.
The 2.0-mm width is particularly interesting because it offers more contact area and heat transfer than very fine 1.0-mm versions, while remaining significantly more controllable than wider tips for rough work. This makes this geometry very well-suited for users seeking a tip that is suitable for everyday use, easily accessible, and versatile.
Recommended Use
The QUICK TSS10C-2C is recommended for professional soldering work with low to medium heat requirements, where a beveled tip shape offers handling advantages. It is ideal for electronics, service, manufacturing, and rework when clean results, good maneuverability, and reliable heat transfer are required.
For very fine specialty work with extremely tight structures, even smaller tip shapes can offer advantages. For large, high-mass, or highly heat-dissipating joints, wider tips are usually better suited. The TSS10C-2C positions itself right in the middle as a balanced solution for many typical applications in the professional electronics sector.
Quick Summary
The QUICK TSS10C-2C is a 200W cartridge soldering tip for the TS10 system with a 45° beveled 2.0 mm geometry.
It is ideal for fine to medium-duty electronics soldering and offers an excellent balance of precise control, comfortable accessibility, and reliable heat transfer. This makes it a strong choice for users seeking a versatile and practical soldering tip for professional use.
